Toshiba AV55 Flat Panel Television User Manual


 
When 3D Colour Management is selected it allows the
‘Base colour adjustment’ feature to become available.
3D Colour Management
In the PICTURE menu press Q to select
3D Colour Management.
Press
S
or
R
to select On or Off.
1
2
Press P and Q to select an option, then
R
to
adjust the settings.
2
Press
S
and
R
to select Hue, Saturation or
Brightness, then Q or P to adjust the settings.
3
In the PICTURE menu press Q to select
Base Colour Adjustment, then press OK.
1
The Base Colour Adjustment feature allows the
adjustment of individual colours to suit personal preference.
This can be useful when using an external source.
Base Colour Adjustment
To return to the original factory settings select
Reset and press OK.
22
Picture controls (continued)
When Active Backlight Control is activated it will
automatically optimise the backlighting levels for
dark scenes.
Active Backlight Control
In the PICTURE menu press Q to select Active
Backlight Control.
Press
S
or
R
to select On or Off.
1
2
DNR enables you to ‘soften’ thescreen representation of a
weak signal to reduce the noise effect.
DNR – Digital Noise Reduction
Select DNR from the PICTURE menu.
Use
S
or
R
to adjust. The differences may not
always be noticeable (for the best result use
lower settings as picture quality can be lost if the
setting is too high).
1
2
When watching a DVD the compression may cause some
words or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by
smoothing out the edges.
MPEG NR – Noise Reduction
Select MPEG NR from the PICTURE menu.
Use
S
or
R
to select a setting to suit your
preference.
1
2
PICTURE
Picture Settings
Active Backlight Control On
3D Colour Management On
Base Colour Adjustment
MPEG NR Low
DNR Auto
PICTURE
Picture Settings
Active Backlight Control On
3D Colour Management Off
Base Colour Adjustment
MPEG NR Low
DNR Auto
Base Colour Adjustment
Hue Saturation Brightness
Red 0 0 0
Green 0 0 0
Blue 0 0 0
Yellow 0 0 0
Magenta 0 0 0
Cyan 0 0 0
Reset
Hue Saturation Brightness
Red 0 00
gpg