Filter
Top Products
IN/OUT
MEDIA REC.
TV
SAT
7
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
A wide variety of external equipment can be connected
to the back of the television, therefore the relevant
owners manuals for all additional equipment must be
referred to.
We recommend SCART 1 for a decoder and SCART 2 for a
media recorder.
If connecting S-VIDEO equipment, set the INPUT for EXT2. See
page 31.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment, press
B
to select between DTV, EXT1, EXT2, EXT3, HDMI1,
HDMI2 or ATV.
Aerial cables:
Connect the aerial to the socket on the rear of the television. If
you use a decoder* and/or a media recorder it is essential that
the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television. Connect the
media recorder SAT socket to the decoder MEDIA REC. socket.
Before running Auto tuning put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
The phono sockets alongside the VIDEO INPUT sockets will
accept L and R audio signals.
HDMI (High-Definition Multimedia Interface) is for use with a
DVD, decoder or electrical equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-definition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PLEASE NOTE: Although this television is able to connect to
HDMI equipment it is possible that some equipment may not
operate correctly.
Media Recorder
Decoder*
CABLE HOLDER
FIXING STRAP
HDMI INPUT
SOCKETS
SCART 2 (EXT2)
COMPONENT VIDEO INPUT (EXT3)
SCART 1 (EXT1)
VIDEO INPUT (EXT4)
*
a decoder could
be Digital Satellite
or any other
compatible decoder.
☛
The cable holder
can be used for aerial,
media recorder and
audio cables. Do not
use as a handle and
remove all cables
before moving the
television.
☛
HDMI, the HDMI logo, High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
gpg