Filter
Top Products
User’s Manual 4-37
PORTÉGÉ M750
Important message
Before you write or rewrite to any of the media supported by the DVD
Super Multi (Double Layer) Drive Kit II, please read and follow all of the
setup and operating instructions in this section. If you fail to do so, you may
find that the DVD Super Multi (Double Layer) Drive Kit II may not function
properly, and you may fail to write or rewrite information successfully - this
may cause you to either lose data or incur other damage to the drive or
media.
Disclaimer
TOSHIBA does not bear responsibility for the following:
■ Damage to any CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW,
DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM disc that may
be caused by writing or rewriting with this product.
■ Any change or loss of the recorded contents of CD-R, CD-RW, DVD-R,
DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer),
DVD+RW or DVD-RAM media that may be caused by writing or
rewriting with this product, or for any business profit loss or business
interruption that may be caused by the change or loss of the recorded
contents.
■ Damage that may be caused by using third party equipment or
software.
Given the technological limitations of current optical disc writing drives, you
may experience unexpected writing or rewriting errors due to disc quality or
problems with hardware devices. In view of this, it is good practice to make
two or more copies of important data, in case of any undesired change or
loss of the recorded contents.
Before writing or rewriting
■ Based on TOSHIBA’s limited compatibility testing, we suggest the
following manufacturers of CD-R, CD-RW, DVD-R, DVD-R (Dual
Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or
DVD-RAM media, however, it must be noted that disc quality can affect
write or rewrite success rates. Please also be aware that in no event
does TOSHIBA guarantee the operation, quality or performance of
any disc.
When writing information to media using an optical drive, you should
always ensure that you connect the AC adaptor to a live power socket.
It is possible that, if data is written while powered by the battery pack, the
write process may sometimes fail due to low battery power - in these
instances data loss may occur.