Filter
Top Products
22
Chapter 2: Connecting your TV
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HLV95 *Web 213 : 276
Connecting a digital audio system
The TV DIGITAL AUDIO OUT terminal outputs a Dolby
Digital
or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby Digital
decoder or other external audio system with optical audio input.
You will need:
one optical audio cable (Use an optical audio cable that has
the larger “TosLink” connector and not the smaller “mini-
optical” connector.)
To control the audio:
Turn on the TV and the digital audio device.
Press MENU on the TV’s remote control and open the Audio
menu.
Highlight Audio Setup and press ENTER.
In the Optical Output
Format field, select either
Dolby Digital/Surround or
PCM, depending on your
device (see “Selecting the
optical audio output format”
on page 76).
Audio Setup
MTS Stereo
Language English
Speakers On
Optical Output Format Dolby Digital/Surround
Reset
Done
DVD Audio
Stereo
CAUTION:
Some audio systems may not be compatible with Dolby Digital bitstream
signals. Older audio systems that are not compatible with standard optical
out signals may not work properly, creating a high noise level that may
damage your hearing, speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY.
Note:
•The DIGITAL AUDIO OUT terminal may not output some digital audio
sources because of copy restrictions.
•The DIGITAL AUDIO OUT terminal outputs signals only when receiving
digital broadcasts.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
LINE IN
Optical
Audio IN
LR
Connecting an analog audio system
This connection allows you to use external speakers with an external audio amplifier to adjust the sound level.
You will need:
one pair of standard audio cables
To control the audio:
Turn on the TV and the stereo amplifier.
Turn off the TV’s built-in speakers (see “Turning off the built-in
speakers” on page 76).
Note: To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set to a reasonable
listening level.
Dolby Digital decoder or
other digital audio system
TV lower back panel
LINE IN
LR
Analog audio amplifier
TV upper back panel
#01E_015-024_27HLV95 05.10.6, 10:37 AM22
Black