Filter
Top Products
68
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HLV95 *Web 213 : 276
Chapter 8: Using the TV’s features
Selecting the cinema mode
(480i signals only)
When you view a DVD (480i signal; 3:2 pulldown processed)
from a DVD player connected to the VIDEO 1, VIDEO 2,
ColorStream HD (component video), or HDMI inputs on the
TV, smoother motion can be obtained by setting the Cinema
Mode to Film.
To set the Cinema Mode to Film:
1. Press MENU and open the Video menu.
2. Highlight Theater Settings and press ENTER.
Picture Settings
Advanced Picture Settings
Theater Settings
Video
Navigate
Select
Back Exit
CH RTN
EXIT
3. In the Cinema Mode field, select Film.
DoneReset
Theater Settings
Picture Size Natural
Picture Scroll -1
Cinema Mode
Auto Aspect Ratio On
Film
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
To set the Cinema Mode to Video:
Select Video in step 3 above.
Using the FREEZE feature
1. When viewing the TV, press FREEZE to make the picture a
still picture.
2. To return to the moving picture, either press FREEZE
again, press EXIT or press any other button.
Note: If the TV is left in FREEZE mode, after 15 minutes it will
automatically release the FREEZE mode and return to the
moving picture.
Moving picture Still picture
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws of
the United States and other countries, and may subject you to
civil and criminal liability.
FREEZE
#01E_060-068_27HLV95 05.10.6, 11:01 AM68
Black