Filter
Top Products
25
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HLV95 *Web 213 : 276
Using the remote control
3
Note: The error message “Not
Available” will appear if you press a
key for a function that is not available
The buttons used for operating the TV are described here. For a complete list of the remote control’s
functions, see the remote control functional key chart on pages 27–28.
For a list of the buttons that operate the TV Guide On Screen
™
system, see page 47
POWER
turns the TV on and off. Press POWER to turn on the TV. The red LED indicator on the
TV will be illuminated. Press POWER again to turn off the TV.
SLEEP
accesses the sleep timer (page 77).
LIGHT
The first press of the LIGHT button lights the keypad and turns on the Illumination mode.
With the Illumination mode on, pressing any other key lights the keypad for 5 seconds
(10 seconds if you’re in programming mode). Subsequent presses of the LIGHT button toggle
between turning the Illumination mode on and off.
Channel Numbers (0–9, –/100)
directly tune channels. The “–” button is used to tune digital channels
(page 64) or to display the favorite channel list (page 42).
INPUT
selects the video input source (page 60).
MODE
cycles through the six remote control device modes: TV, CBL/SAT, VCR/PVR, DVD,
AUDIO1, and AUDIO2. The TV mode should be chosen to control the TV and Built-in DVD.
Every time you turn the power on, the TV starts from the TV mode. The mode indicator light will
remain lit for a few seconds (page 29).
PIC SIZE
cycles through the five pictures sizes: Natural, TheaterWide 1/2/3, and Full (page 65).
MENU
accesses the main TV menu system (pages 33 and 34) or opens a menu in the TV Guide
On Screen
™
system (Chapter 7).
TV GUIDE
opens the TV Guide On Screen
™
system (Chapter 7).
INFO
provides detailed information on highlighted items in the TV Guide On Screen
™
system (Chapter 7).
HOME ( )
accesses the home function of the Channel Browser
™
feature (page 63)
PIC MODE
selects the picture mode (page 69).
ENTER
activates highlighted items in the main menu system and the TV Guide On Screen
™
system.
Arrow buttons (yzx •)
When a menu is on-screen, these buttons select or adjust programming
menus. (Also see
x / •).
x / •
While watching TV, these buttons tune to the previous/next channel in the
channel history (page 62). (Also see “Arrow buttons” above.)
CH yz
cycles through programmed channels when no menu is on-screen (page 40) and functions as
page up/down when a menu is on-screen or when the TV Guide On Screen
™
system is open
(Chapter 7).
VOL yz
adjusts the volume level.
EXIT
closes on-screen menus and the TV Guide On Screen
™
system.
CH RTN
returns to the last viewed channel (page 64).
TV/VCR
selects TV mode to view one program while recording another.
RECALL
displays TV setting information on-screen (page 79).
MUTE
reduces or turns off the sound (page 74).
REC
initiates the recording process when in the TV Guide On Screen
™
system.
FAV CH yz
tunes to the next higher/lower favorite channel (page 42).
FREEZE
accesses the freeze feature (page 68).
Learning about the remote control
Remote control effective range
For optimum performance, aim the remote
control directly at the TV and make sure
there is no obstruction between the
remote control and the TV.
16.4 ft (5m)
Point remote
control toward
remote sensor on
front of TV.
You can also control the built-in DVD when the MODE button on the remote control
is in TV mode. For DVD operation the following buttons are used: DVD RTN, PBC,
SLOW, SKIP, REW, FF, PAUSE, PLAY, OPEN/CLOSE, STOP, A-B REPEAT, and
SEARCH (see chapter 10).
#01E_025-032_27HLV95 05.10.6, 10:40 AM25
Black