Filter
Top Products
Chapter 8: Using the TV’s features
71
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HLV95 *Web 213 : 276
Adjusting the picture (continued)
Using dynamic contrast
When dynamic contrast is set to “On,” the TV will detect
changes in the picture quality that affect the appearance of your
contrast settings and then automatically adjust the video.
When dynamic contrast is set to “Off,” the settings selected in
the Contrast field in Picture Settings will be used.
To select dynamic contrast preferences:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
Picture Settings
Advanced Picture Settings
Theater Settings
Video
3. Press z to highlight the Dynamic Contrast field, and then
press x • to make a selection (On or Off).
ANT 1
Advanced Picture Settings
Done
CableClear Auto
Color Temperature
Back Lighting
Cool
Dynamic Contrast On
Reset
100
MPEG Noise Reduction
Off
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Note: The Color Temperature, Back Lighting, Dynamic Contrast
adjustments in the Advanced Picture Settings menu are
automatically saved in the Preference mode (see “Selecting the
picture mode” on page 69.
Using MPEG noise reduction
The MPEG noise reduction feature allows you to reduce visible
interference caused by MPEG compression. Choices for MPEG
noise reduction are High, Medium, Low and Off. Off is
automatically selected when this feature is disabled (“grayed
out”). This feature is not available in the PC input mode.
To select the MPEG noise reduction level:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
3. Press z to highlight the MPEG Noise Reduction field, and
then press x • to make a selection.
Picture Settings
Advanced Picture Settings
Theater Settings
Video
ANT 1
Advanced Picture Settings
Done
CableClear Auto
Color Temperature
Back Lighting
Cool
Dynamic Contrast On
Reset
100
MPEG Noise Reduction
Off
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
#01E_069-076_27HLV95 05.10.6, 11:04 AM71
Black