Filter
Top Products
30
Chapter 3: Using the remote control
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HLV95 *Web 213 : 276
Numbers
MODE
VOL yz
Programming the remote control to operate your other devices (continued)
RECALL
Operational feature reset (8900)
This feature clears all setup features not related to “Device code
set up” and resets the Volume Lock to “TV.”
To reset the features:
While holding down RECALL, press 8 – 9 – 0 – 0. The
Mode indicator will blink two times, and then pause and
blink two more times.
Using the volume lock feature (8000)
For the TV, CABLE/SAT, VCR, and DVD modes, the volume
controls (VOL yz and MUTE) can be locked to the selected
device mode. This feature does not apply to the AUDIO1 and
AUDIO2 modes.
To lock the volume controls to always control the
CABLE/SAT device volume (for example):
1. Repeatedly press MODE to select CABLE/SAT mode.
2. While holding down RECALL, press 8 – 0 – 0 – 0.
3. Press VOL y.
The CABLE/SAT mode light will blink two times (locked).
To reset the volume controls to the original device mode:
1. While holding down RECALL, press 8 – 0 – 0 – 0.
2. Press VOL z.
The mode light will blink four times (unlocked).
#01E_025-032_27HLV95 05.10.6, 10:42 AM30
Black