Toshiba 51H94 Projection Television User Manual


 
(E) 51/57H94
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
88
1. Press MENU and highlight the LOCKS menu icon.
Locks
Enable Rating Blocking
Edit Rating Limits
Front Panel Lock
Game Timer
New PIN Code
Navigate Select Back Exit
DVD RTN
CH RTN
EXIT
Off
Off
Off
Off
Channels Block
Input Lock
2. Press z, which displays the PIN code entry screen.
The LOCK SYSTEM screen (below) appears if a PIN code
has not been stored. Press the Channel Number buttons to
enter a new four-digit code, enter the code a second time to
confirm, and press ENTER.
The LOCKS ACTIVE screen (below) appears if the PIN
code is already stored. Press the Channel Number buttons
to enter your four-digit code and press ENTER.
If the wrong PIN code is entered, the message “Incorrect PIN
code” appears. Highlight RETRY and press ENTER. Enter the
code again and press ENTER.
When the correct PIN code is entered, the LOCKS menu
opens.
Locks
Enable Rating Blocking
Edit Rating Limits
Front Panel Lock
Game Timer
New PIN Code
Navigate Select Back Exit
DVD RTN
CH RTN
EXIT
Off
Off
Off
Off
Channels Block
Input Lock
Using the Locks menu
9
The LOCKS menu includes the RATING BLOCKING, CHANNELS BLOCK, INPUT LOCK, FRONT PANEL LOCK,
GAME TIMER, and NEW PIN CODE features. You can use these features after entering the correct PIN code.
If you cannot remember your
PIN code
While the PIN code entering screen is displayed, press RECALL
four times within five seconds. The PIN code will be reset and
you can enter a new PIN code.
Entering the PIN code
Changing your PIN code
1. Press MENU and highlight the LOCKS menu icon.
2. Press z to display the PIN code entering screen.
3. Enter your four-digit PIN code and press ENTER.
4. Press z to highlight NEW PIN CODE and press ENTER.
5. Press the Number buttons to enter a new four-digit code.
Retype the numbers to confirm the PIN code you entered.
6. Press ENTER. The new PIN code is now active.
Locks
Enable Rating Blocking
Edit Rating Limits
Front Panel Lock
Game Timer
New PIN Code
Navigate Select Back Exit
DVD RTN
CH RTN
EXIT
Off
Off
Off
Off
Channels Block
Input Lock
H94(E)088-91(9-Locks) 8/3/04, 6:46 PM88