Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
20
Learning about the remote control
Only the buttons used for operating the TV are described here.
POWER turns the TV on and off
SLEEP accesses the automatic TV shut-off function (page 41)
LIGHT The first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on, pressing any
other key lights the keypad for 5 seconds (10 seconds if the remote
control is in programming mode). Subsequent presses of the LIGHT
button toggle the Illumination mode on and off.
Channel Numbers (0–9, 100) allow direct access to channels (page 24)
MODE cycles through the six device modes (TV, CABLE/SAT, VCR,
DVD, AUDIO1, AUDIO2). The mode indicator will remain lit for
10 seconds.
FAVORITE accesses the multi-window favorite channel scan feature
(page 30)
INFO accesses the multi-window channel preview feature (page 30)
MENU accesses on-screen programming menus (page 21)
ENTER sets programming menu information (page 21)
yz x • Buttons select or adjust programming menus (page 21)
(FAV) x • Buttons select your favorite channels (page 25)
VOL yz adjusts the volume level
EXIT exits programming menus (page 21)
CH yz cycles through programmed channels (page 24)
CH RTN returns to the last viewed channel (page 25)
TV/VCR toggles between TV and VCR modes
RECALL displays on-screen information(page 46)
MUTE mutes the sound (page 42)
INPUT selects the video input source (page 39)
MULTI turns the multi-window strobe function on and off (page 30)
PIP Buttons access the PIP functions (pages 28–29):
PIP turns the PIP on and off
PIP CH yz selects the PIP channel
STILL freezes the PIP picture
SWAP switches the main and PIP pictures
LOCATE changes the position of the PIP picture
SOURCE selects the PIP signal input source
CT-90121