Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
30
(Continued from previous page)
Using the INFO (channel preview) function
Press INFO to scan the channels you previously programmed into the
TV’s memory (see “Adding channels to the TV’s memory” on page
23). A 6-picture multi-window scan will start.
4
6
7 912
15
To cancel the channel preview function:
Press INFO again.
Using the FAVORITE function
1. Press FAVORITE to scan the favorite channels you previously
programmed into the TV’s memory (see “Programming your
favorite channels” on page 25).
A 9-picture multi-window scan of your favorite channels will
start. The first window will display as a moving picture.
2. Press y z x • to select the channel you want to watch. The
selected channel will display as a moving picture in the 9-picture
multi-window.
3. Press ENTER to display the channel you selected in step 2 as a
normal picture.
7
6
12 18
42 97 106
7
33
9
X
Each time you press FAVORITE, the display will change in the
following order:
FAVORITE CH1— FAVORITE CH2 — Off
To cancel the favorite function:
Press FAVORITE again.
Using the MULTI (strobe) function
Press MULTI to start the strobe function. A 9-picture multi-window
strobe starts for the current main picture.
For example, you can strobe the action of the TV program you are
watching, or view a decisive moment of a sports program that was
previously recorded.
To cancel the strobe function:
Press MULTI again.
Note:
• A program or channel you set up as
blocked in the Locks menu may not always
display as blocked during INFO (channel
preview) or FAVORITE multi-window
scanning. When blocked properly, the
program will appear as a black window
with an “X” under the channel number.
• The INFO (channel preview) function does
not work when ANT 2 mode is selected.
• The INFO (channel preview), FAVORITE,
and MULTI (strobe) functions do not work
when the main picture source is
ColorStream.
INFO
MULTI
FAVORITE
ENTER
yzx •
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images can
become permanently engrained in the
picture tube. This type of damage is
NOT COVERED BY YOUR WARRANTY
because it is the result of misuse. See
item 32 on page 4.