Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
31
Using the LOCKS menu
The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and
New PIN Code functions. You can use these functions after entering
the correct PIN code.
Entering the PIN code
1. Press MENU, and then press x or • until the LOCKS menu
appears.
LOCKS
VCHIP–
V
NEW
CH LOCK
PIN
I LOCK
CODE
DEO
ENABLE
TV RAT
MPAA
ING
RATING
BLOCKING
BLOCKING OPTION
OFF
OFF
2. Press y or z to display the PIN code entering mode:
•BLOCKING RESET status:
Press the Channel Number
buttons (0–9) to store a new
4-digit PIN code, and then press
ENTER.
•BLOCKING ACTIVE status
(when the PIN code is already
stored):
Press the Channel Number
buttons (0–9) to enter the
4-digit PIN code you previously
stored, and then press ENTER.
If the wrong PIN code is entered, the message “Incorrect” will
appear. Enter the code again.
3. When the PIN code is entered, the LOCKS menu opens.
LOCKS
VCHIP–
V
NEW
CH LOCK
PIN
I LOCK
CODE
DEO
ENABLE
TV RAT
MPAA
ING
RATING
BLOCKING
BLOCKING OPTION
OFF
OFF
Continue to set each item following the steps on the next page.
If you cannot remember your PIN code
While the PIN code entering screen is displayed, press RECALL four
times within 5 seconds. The PIN code you stored will be released
(returned to BLOCKING RESET status).
RECALL
MENU/
ENTER
yzx •
Channel
Numbers
Note:
The V-Chip function is only available for the
U.S. V-Chip system. The Canadian V-Chip
system (Puce-V) is not supported.
LOCKS
BLOCK NG RESETI
PIN CODE
1110
LOCKS
BLOCK NG ACTIVEI
PIN CODE 1 234