Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
36
Adjusting the picture
Selecting the picture mode
You can select your desired picture type from four preset picture
modes: Sports, Standard, Movie, and Preference.
*(see “Saving your new preferences” on page 37.)
To select the picture mode:
1. Press MENU, then press x or • until the PICTURE menu
appears.
2. Press z or y to select MODE.
3. Press x or • to highlight the mode you prefer.
P CTURE ANTENNAI
MODE
PREFERENCE
PREFERENCE
CONTRAST
SPORTS STANDARD MOVI E///
BR GHTNESSI
COLOR
RESET
SAVE NEW
TINT
SHARPNESS
50
50
50
0
80
Adjusting the picture quality
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, color, tint, sharpness, flesh tone,
noise reduction, and color temperature.
To adjust the picture quality:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press z or y until the item you want to adjust is highlighted.
3. Press x or • to adjust the level.
P CTURE ANTENNAI
MODE STANDARD
PREFERENCE
CONTRAST
BR GHTNESSI
COLOR
RESET
SAVE NEW
TINT
SHARPNESS
50
75
50
50
0
The PICTURE qualities you have adjusted can be saved in the TV’s
memory with the Save New Preference feature (see page 37). You can
keep these settings or choose factory set options as described under
“Selecting the picture mode” above.
Selection x Pressing •
Contrast lower higher
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
MENU
yzx •
Note:
If you select one of the factory-set picture
modes (Sports, Standard, or Movie) and then
change a picture quality setting (for example,
increase the contrast), the picture mode
automatically changes to Preference in the
Picture menu.
To save your new picture quality settings, you
must select “Save New Preference” before
closing the Picture menu or the TV will return
to the previous picture mode.
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture setting (factory setting)
Movie Movie-like picture setting (factory setting)
Preference Your personal preference*