Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
34
Unlocking programs temporarily
1. If you try to watch a TV program that exceeds the rating limits
you set, the TV will enter into the program lock mode.
THIS PROGRAM HAS BEEN BLOCKED !
6
TV
EXCEEDS
PUSH MUTE TO ENTER
SET L I ITSM
INP
PG L V–
CABLE
2. If you want to watch the locked program temporarily, press
MUTE.
3. Press the Channel Number buttons (0–9) to enter the 4-digit
PIN code you stored (see “Entering the PIN code” on page 31).
BLOCK ACT
ENTER
TO TEMPORAR
ING IVE
IN
I
––––
UN–BLOCKLY
CODEP
0–9 TO SELECT ENTER: TO SET:
4. Press ENTER.
If the number is correct, the lock mode will be released and the
normal picture will appear.
All locking is disabled until the TV is turned off, and will be
enabled when the TV is turned on again.
If a wrong PIN code is entered, the message “Incorrect PIN code”
appears. Enter the code again.
Locking channels
With the CH LOCK feature, you can lock specific channels. You will
not be able to tune locked channels with the Channel y z buttons or
Channel Number buttons unless you clear the setting.
You can lock a maximum of eight channels.
Note: The CH LOCK feature is independent of the ENABLE BLOCKING
option of V-Chip control (page 32).
To lock channels:
1. From the LOCKS menu, select CH LOCK.
2. Press x or • to display the CH LOCK menu.
3. Press the Channel Number buttons to enter the channel you
want to lock. (The channel you are currently watching cannot be
locked.)
4. Press ENTER.
LOCKS
VCHIP–
V
CH
NEW P I N
I LOCK
LOCK
CODE
DEO 0 0 0 0
00
TV CABLE
00
ENABLE
TV RAT
MPAA
ING
RATING
BLOCKING
BLOCKING OPTION
OFF
CH
CLEAR
INPUT 1 2
LOCKS
VCHIP–
V
CH
NEW P I N
I LOCK
LOCK
CODE
DEO 21000
00
TV CABLE
00
ENABLE
TV RAT
MPAA
ING
RATING
BLOCKING
BLOCKING OPTION
OFF
CH
CLEAR
INPUT
5. Repeat steps 3 and 4 for other channels.
LOCKS menu
LOCKS
VCHIP–
V
CH
NEW PIN
I LOCK
LOCK
CODE
DEO OFF
ENABLE
TV RAT
MPAA
ING
RATING
BLOCKING
BLOCKING OPTION
ON
To select each item:
Press z or y .
Channel
Numbers
ENTER
yzx •
MUTE
CH yz