Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
45
Turning off the built-in speakers
Use this feature to turn the TV speakers off when you connect an
audio system. (See “Connecting an audio system” on page 11.)
To turn off the built-in speakers:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight SPEAKERS.
3. Press x or • to highlight OFF.
AUD OI
ON
ON/OFF
OFF
80
SPEAKERS
AUD O OUTI
STABLE SOUND
MA I N
CYCLONE
CYC LEVEL
To turn on the built-in speakers:
Highlight ON in step 3 above.
Selecting the Audio OUT sound
This feature allows you to select the sound source (MAIN or PIP) that
is output from the Audio OUT jacks (see “Connecting two VCRs” on
page 10).
This is useful when amplifying or recording the PIP sound with the
external equipment while hearing the sound of main picture through
the built-in speakers.
To select the Audio OUT sound:
1. Press MENU, then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight AUDIO OUT.
3. Press x or • to highlight MAIN or PIP.
AUD OI
ON
OFF
MAIN /
PPI
100
ON
SPEAKERS
AUD O OUTI
STABLE SOUND
CYCLONE
CYC LEVEL
• MAIN: Main picture sound.
•PIP : Selected PIP sound.
Note:
Make sure the volume control of your audio
amplifier is set to a moderate listening level.
yzx •
MENU
Note:
If the PIP mode is selected and the PIP
window is not on the screen, the Audio OUT
jacks will not output a signal.