Filter
Top Products
14
External Speaker Connections
External speakers (optional) may be connected to the
plasma display to reproduce sound from VIDEO, DVD or
RGB signal sources.
External speakers may be connected directly to the
SPEAKER terminals or indirectly by connecting a stereo
system amplifier to the audio outputs.
CAUTION:
Unplug the plasma display and all
connected components before connecting external
speakers. Use only speakers with 6-ohm impedance and
a power input rating of 7 watts or more.
AC IN
RGB 3
(
Digital RGB
)
SPEAKERS MUST
HAVE MORE THAN
7WATT RATING
IMPEDANCE 6 OHM
RIGHT LEFT
VIDEO 1
VIDEO 2
REMOTE
CONTROL
RGB 1
L
(
MONO
)
L
(
MONO
)
G/Y
/ VIDEO 3
HD
VD
R
R
Y
L
(
MONO
)
R
EXTERNAL
CONTROL
CONTROL
LOCK
ON / OFF
R/C
R
/P
R
B/C
B
/P
B
C
B
/P
B
C
R
/P
R
AUDIO 2 DVD1/HD1AUDIO 3 AUDIO 1RGB2/ DVD2/HD2
RIGHT LEFT
To connect external speakers directly to the plasma display:
1. Strip the ends of the speaker wires.
2. Press a tab below a SPEAKER terminal, insert the
speaker wire, and release the tab to secure the speaker
wire connection:
[a] Connect the right speaker (located at right side
of the display when viewed from the front)
positive (+) wire to RIGHT +.
[b] Connect the right speaker negative (–) wire to
RIGHT –.
[c] Connect the left speaker negative (–) wire to
LEFT–.
[d] Connect the left speaker positive (+) wire to
LEFT+.