Filter
Top Products
44
*1 Only when using a graphic accelerator board that is capable of displaying 852ן480.
*2 Display only 640 lines with the screen center of the vertical orientation located at the center.
*3 The picture is displayed in the original resolution.
The picture will be compressed for other signals.
*4 The aspect ratio is 5:4. This signal is converted to a 720 dotsן768 lines signal.
*5 Normally the RGB select mode suited for the input signals is set automatically. If the picture is not displayed properly, set
the RGB mode suited for the input signals listed in the table above.
*6 Other screen modes (ZOOM and JUST) are available as well.
NOTE:
• While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size
of the picture or the fine picture because of errors in synchronization of your computer.
• This display has a resolution of 1024 dots
ן
768 lines. It is recommended that the input signal should be XGA or
equivalent.
• With digital input some signals are not accepted.
• The sync may be disturbed when a nonstandard signal other than the aforementioned is input.
• If you are connecting a composite sync signal, use the HD terminal.
* “IBM PC/AT” and “XGA” are registered trademarks of International Business Machines, Inc. of the United States.