Filter
Top Products
40
Setting high definition images to the suitable
screen size
Use this procedure to set the number of vertical lines of
the input high definition image to 1035 or 1080.
Example: Setting the “1080B” mode to “1035I”
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “OPTIONS,” then
press the PROCEED button.
The “OPTIONS” screen appears.
2. Use the ▲ and ▼ buttons to select “HD SELECT.”
OPTIONS
: VIDEO1
: HD/DVD1
: RGB1
: RGB
: AUTO
: 1080B
SEL. ADJ. RETURN
EXIT
AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
3. To set the HD SELECT mode to “1035I” ...
Use the
ᮤ
and
ᮣ
buttons to select “1035I.”
The mode switches as follows each time the
ᮤ
or
ᮣ
button is pressed:
→1080B ↔ 1035I ↔ 1080A ←
OPTIONS
: VIDEO1
: HD/DVD1
: RGB1
: RGB
: AUTO
: 1035I
SEL. ADJ. RETURN
EXIT
AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once
more.
Information
Ⅵ HD SELECT modes
These 3 modes are not displayed in correct image
automatically.
1080B ...............Standard digital broadcasts
1035I ............... Japanese “High Vision” signal format
1080A ...............Special Digital broadcasts
Information
Ⅵ RGB SELECT modes
One of these 6 modes must be selected in order to
display the following signals correctly.
AUTO ..............Automatically selects the suitable
mode for the specifications of input
signals as listed in the table
“Computer input signals supported by
this system” on page 43.
STILL .............. To display VESA standard signals.
(Use this mode for a still image from
a computer.)
MOTION ..........The video signal (from a scan
converter) will be converted to RGB
signals to make the picture more
easily viewable. (Use this mode for a
motion image from a computer.)
WIDE1............. When an 852 dotן 480 line signal
with a horizontal frequency of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.
WIDE2............. When an 848 dotן 480 line signal
with a horizontal frequency of 31.0
kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.
DTV .................Set this mode when watching digital
broadcasting (480P).
See page 43 for the details of the above settings.
Ⅵ Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.