Filter
Top Products
29
Information
Ⅵ Adjusting the Auto Picture
ON ...................The Picture ADJ and Fine Picture
adjustments are made automatically.
OFF .................The Picture ADJ and Fine Picture
adjustments are made manually.
Ⅵ Adjusting the position of the image
V-POSITION ...Adjusts the vertical position of the
image.
H-POSITION ... Adjusts the horizontal position of the
image.
V-HEIGHT .......Adjusts the vertical size of the image.
(Except for JUST mode)
H-WIDTH .........Adjusts the horizontal size of the
image. (Except for JUST mode)
FINE PICTURE
*.. Adjusts for flickering.
PICTURE ADJ
* ...Adjusts for striped patterns on the
image.
* The Picture ADJ and Fine Picture features are available
only when the “Auto Picture” is off. The Auto Picture,
Fine Picture and Picture ADJ features are available only
for RGB signals.
Ⅵ Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults
except for Auto Picture.
Function Settings Menu
Setting the on-screen display
When using the display for presentations, etc., the display
can be set so that the input source, screen mode, etc., do
not appear.
Example: Turning the on-screen display mode off
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION,” then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “OSD.”
FUNCTION
OSD
OSD ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
RGB3 ADJ.
LONG LIFE
RESET
: ON
: 1
: OFF
: 3
: ON
: 1
SEL. ADJ. RETURN
EXIT
3. To turn the on-screen display mode off ...
Use the
ᮤ
and
ᮣ
buttons to select “OFF.”
The mode switches as follows each time the
ᮤ
or
ᮣ
button is pressed:
ON ↔ OFF
FUNCTION
OSD
OSD ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE
RGB3 ADJ.
LONG LIFE
RESET
: OFF
: 1
: OFF
: 3
: ON
: 1
SEL. ADJ. RETURN
EXIT
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once
more.
Information
Ⅵ OSD modes
ON ...................The on-screen display appears.
OFF ................. The on-screen display does not appear.
Ⅵ Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.