Filter
Top Products
54
CONNECTING OTHER
EQUIPMENT
If you connect a VCR with an S-video jack to the “S-VIDEO” jack on the back of the TV, you must also connect the
audio cables to the “VIDEO 1 IN” AUDIO jacks. The S-video cable supplies video signals only.
To connect a VCR with an S-video jack
See pages 9 - 10 for details on
Antenna/Cable TV connections.
Antenna/Cable TV
TV rear
S-video cable (Not supplied)
Audio cable (Not supplied)
Antenna
input
Antenna
output
VCR
Audio
outputs
S-video
output
Notes on the VIDEO 2 IN jacks
The VIDEO 2 IN jacks can also be used for connecting a
second piece of video equipment with S-video out.
To view signals from equipment connected to the VIDEO
2 IN jacks, select “VIDEO 2”.
Notes:
• When the S-video cable is connected to the S-VIDEO
IN jack, the video cable (phono-type) should not be
connected.
• The S-VIDEO jack accepts SEPARATED Luminance/
Chrominance (Y/C) signals conforming to the NTSC
standard.
1
2
3
To select the video input source
Turn on the TV and the VCR.
Press TV/VIDEO on the Remote Control (or ANT/
VIDEO on the TV) to select “VIDEO 1” in this
example.
Operate your VCR normally.
TO SELECT PUSH TV /VIDEO
VIDEO 3
COLOR STREAM
VIDEO 2
VIDEO 1
TV
CHAPTER 5 CONNECTING OTHER EQUIPMENT
Connecting External
Equipment
(continued)
CHANNEL IN
ON OFF
OUT
RL
VAR
AUDIO
OUT
VIDEO
L/
MONO
AUDIO
R
IN
DVD IN
L
R
CR
CB
Y
L/
MONO
AUDIO
S-VIDEO
VIDEO
R
ANT
(
75
)
ANT-1
OUT
ANT-2
AUDIO CENTER
VIDEO-1 VIDEO-2
COLOR
STREAM
INPUT
AUDIO