Filter
Top Products
2.4.2 Table-Top Installation
The Multichannel Media Converter is shipped with four (4) rubber feet for
optional installation on table or other flat, stable surface.
CAUTION: Do not place the Multichannel Media Converter on active,
heat generating equipment and avoid placing other devices on top of the
Multichannel Media Converter. Failure to observe this caution could
cause Multichannel Media Converter to fail.
1. Select a level, secure surface in a well-ventilated area.
2. Remove the adhesive protective sheet from the rubber feet
(
provided
) and affix the feet to the corners on the bottom of the
Multichannel Media Converter, approximately 1 centimeter from
each edge.
3. Set the Multichannel Media Converter securely upright on the
stable surface.
2 INSTALLATION
2.7
MULTICHANNEL MEDIA CONVERTER