Filter
Top Products
1.6 Multichannel Media Converter Management
Module
TRANSITION Networks Multichannel Media Converters are shipped with
a Management Module installed and functional. Embedded SNMP
software in the Management Module allows network management of the
Multichannel Media Converter.
Connections to Management Module
The network administrator can manage the Multichannel Media Converter
using Management Module SNMP software accessed either through the
PS/2 serial port or through the RJ-45 network port.
Management Module LEDs
A set of LEDs monitor the status of the Management Module.
LNK Steady LED indicates that a link has been
established to the Management Module
through the PS/2 serial port or through the
RJ-45 network port.
REC Steady LED indicates that the Management
Module is receiving traffic through the PS/2
serial port or through the RJ-45 network
port.
Ready Steady LED indicates that the Management
Module is properly installed and receiving power.
Serial Port
The network administrator can manage the Multichannel Media Converter
through a command-line interface at a terminal or terminal emulator
conected to the PS/2 port, through the supplied cable (PS/2 to DB9).
1.4
METTF10xx, MFETF10xx
Attached terminal or terminal emulator
connected to PS/2 serial port via management cable.
7
Rx
Tx
8
Rx
Tx
9
Rx
Tx
10
Rx
Tx
11
Rx
Tx
12
Rx
Tx
1
Rx
Tx
2
Rx
Tx
3
Rx
Tx
4
Rx
Tx
5
Rx
Tx
6
Rx
Tx
POWER
MAIN
BCKP
TEST
REC
LNK
Ready
RESET
MANAGEMENT
Managed Fast Ethernet 100BASE-TX to 100BASE-FX
T-LNK
F-LNK
ACTIVE
1 2 3 4
5 6 7
1 2 3 4
5 6
TEST
HDX
NORM
FDX
1 2 3 4
5 6 7
1 2 3 4
5 6
TEST
HDX
NORM
FDX
X
II
REC
LNK
Ready
MANAGEM
Managed Fast Ethernet 1
M
M
X
II