Filter
Top Products
Vidikron VL-52 and VL-57 Installation/Operation Manual 5
PRE
L
IMINAR
Y
2.1
DView at a Glance
Controls and IndicatorsFigure 2-1 shows the locations of the DView controls and indicators.
Figure 2-1. DView Controls and Indicators
1. AV Button (Input Source Selection)
To select a source, press the AV button (with no menus visible on-screen). Use the or
button (see below) to highlight the desired input source and press AV again.
When a menu is visible on-screen, this button operates identically to the ENTER button
on the DView remote control unit (refer to
DView Remote Control on page 9).
2. MENU Selection Button
Press this button to access the on-screen display (OSD) controls, or to exit the current
menu and return to the previous one.
3. Volume Adjustment Buttons (VOL - / VOL +)
Use these buttons to adjust the sound volume. When a menu is visible on-screen, these
buttons operate identically to the left- and right-arrow (
and ) buttons on the DView
remote control unit.
2Controls and Functions
AV
MENU
+
–
VOL
Right Side
7
6
1
2
3
4
5