Filter
Top Products
Installation
Vidikron VL-52 and VL-57 Installation/Operation Manual 21
PRE
L
IMINAR
Y
RS-232 Controller
Connection
Use a straight-through RS-232 cable with a 9-pin male connector to connect a PC or home
theater control/automation system (if present) to the RS-232 port on the DView; see
Figure
3-9.
For more information about using this connection, refer to Serial Communications on
page 47.
Figure 3-9. RS-232 Control System Connection
Rear Panel
To PC or
Automation/
Control
System
DB-9
Male
Connector Pin Assignments:
2 Transmit Data
3 Receive Data
5Ground
1, 4, 6, 7, 8, 9 Not Connected