Filter
Top Products
Serial Communications
Vidikron VL-52 and VL-57 Installation/Operation Manual 49
PRE
L
IMINAR
Y
The following serial commands are meant to emulate buttons on the remote control. Each button
has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing
so via serial commands. These commands provide active OSD responses just like the IR remote.
Each command begins with [key followed by the four-digit number of the button. No carriage
return is necessary. The response you receive from the unit if the command is valid will be a
right-bracket (
]) followed by the four-digit numeric code you sent. (For example, the ‘ON’ command
is [key0015; the response will be ]0015). All commands are in ASCII.
[ key 0002
OFF
0015
ON
[ key 0004
Number 1
0005
Number 2
0006
Number 3
0008
Number 4
0009
Number 5
0010
Number 6
0012
Number 7
0013
Number 8
0014
Number 9
0035
Number “–”
0017
Number 0
[ key 0105
INPUT1
0027
INPUT2
0028
INPUT3
0001
INPUT4
0102
HDMI1
0101
HDMI2
0019
RGB HD
[ key 0003
CUSTOM
0062
ISF NIGHT
0031
ISF DAY
[ key 0040
16:9 (ANA)
0043
4:3
Table 6-1. Serial Commands
Command Description