Filter
Top Products
ENG
Installation
9
D. RS232 Connection
The illustration shows the connection to a home appliances control device. ViewSonic Pro8100’s
RS232 command code table and setup protocol are listed in the Appendix section.
PC or Home Appliances
control Host
RS232 Cabel
E. 12V Screen Curtain Trigger
ViewSonic Pro8100 offers a 12V trigger control pulse upon power-on and power-off. This 12V trigger
pulse can be utilized to motor drive of a home theater’s curtain or a drop-down projection screen.
F. PC Input
ViewSonic Pro8100 can take analog PC video signal by RGB IN (Shown in the illustration below.).
To monitor port
RGB IN
RGB cable
« NOTE »
• When connecting cable, power cords of both a projector and external equipment should be
disconnected from AC outlet.
• The figure above is a sample connection. This does not mean that all of these devices can or
must be connected simultaneously.
• The cables that come with the projector may differ from the above illustration. The included
cables are based on actual shipment delivery.