Filter
Top Products
ENG
ADVANCED OPERATION
23
2-1-4 Aspect Ratio
These functions can only be utilized in video inputs.
Use ▲ and ▼
to navigate the Image Adjust Sub-Menu Selections.
Press to confirm the Sub-Menu selection.
Press to go to previous menu.
CROP
FLEXVIEW
ANAMORPHIC 2
ANAMORPHIC 1
4:3
STANDARD
FULL SCREEN
Fig. 2-1-4
Aspect Ratio Sub-Menu
Standard Original content aspect ratio
Full Screen Full screen by linear stretching.
Crop Full screen by cropping.
Flexview Full screen by non-linear stretching.
Anamorphic 1
Anamorphic 1: Use in conjunction of 16:9
to 2.35:1 conversion lens. Morphing a
2.35:1 film content from a 16:9 letter box
to a full screen 2.35:1 output.
Anamorphic 2
Anamorphic 2: Use in conjunction of 16:9
to 2.35:1 conversion lens. Morphing a 4:3
or 16:9 film contents from a 16:9 format
to a 2.35:1 format.
Note: Requires use of optional .Anamorphic lens. ViewSonic does not provide this optional lens. For more
details on where to purchase the Anamorphic 2.35:1 lens, please visit www.viewsonic.com
2-1-5 Overscan
Overscan controls portions of image being pushed out of the display area.
Use ▲ and ▼
to navigate the Overscan Sub-Menu Selections.
Press to confirm the Sub-Menu selection.
Press to go to previous menu.
OFF
2.5%
5.0%
7.5%
10.0%
MANUAL
Fig. 2-1-5
Overscan Sub-Menu
OFF No overscan.
2.5% 2.5% overscan.
5.0% 5.0% overscan.
7.5% 7.5% overscan.
10.0% 10.0% overscan.
MANUAL
10.0% 10.0%10.0% 10.0%
Press ◄ and ► to navigate the Manual Overscan selections.
Press ▲ and ▼ to set overscan portions
Note: 1080i and 1080p maximum overscan is 7.5%