Vivitek DVR5612 Projection Television User Manual


  Open as PDF
of 47
 
24
INPUT SETUP
1.MAIN INPUT =remote control key "INPUT"
Press OKrst,thenuse◄►tochangetheMain
pictureinputsourcesignal.suchasTV,FRONTRGB,
RGB,DVI,AV1,AV2,FRONTAV,COMP1,COMP2
Changemainpicture's
input signal source
2.PIP INPUT =remote control key "SOURCE"
Press OKrst,thenuse◄►tochangetheMain
picture input source signal.
Changesub-picture's
input signal source
3.INPUT SIGNAL
Press OKrst,thenuse◄►tochange.
Wheninputsourceis640*480,youcanusethis
functionchangeitto720*480.
(OnlysuitableforDVI,FRONTRGB,RGBmode)
TV TUNER SETUP
1.CLOSE CAPTION
Use◄►toONorOFFtheCloasecaptionfunction.
IfyourlocalTVsystemstationnotprovidethisservice.
This function will not work.
2.ANALOG TV SETUP
♦ANTENA/CABLE
Use◄►toselecttheTVinputsourceisfromAntena
or cable
♦CHSEARCH
Press ok to auto search the all channel. Sometimes
theTVsignalnotstable,youneedtousethisfunction
to reset the whole channel again.
♦CHMEMORY
To skip or add the channel that you designate.
WhenyouruntheCHSEARCH1~100%,thentheTV
will auto seach the whole channel to display. But some
channel are blank , you could use this function to skip
thoseblankchannelorsomechannelyoudon'tlike.
Then when you press the channel key
It will skip those channel that you
alreadydeneskiped.
eg:Use◄►toaddorskipchannelno.2.
anduse▲▼toselectwhichchannelwanttoskip.
8
How to use OSD
 previous next