Vivitek DVR5612 Projection Television User Manual


  Open as PDF
of 47
 
28
SPECIAL FEATURE
1.OSD H POSITION
Use◄►tomoveOSDhorizontalposition.
2.OSD V POSITION
Use◄►tomoveOSDverticalposition.
3.OSD TIMEOUT
Use◄►tosetupOSDdisplaytime,thevaluerangeis
15 seconds to 49 seconds.
After press the
MENU key, the
OSDwillappear.
IftheOSDTIMEOUT
is set to 30 seconds,
OSDscreenwill
automatically
disappear in 30
seconds if not any
key is pressed.
4.LANGUAGE
SetOSDdisplaylanguage,therearethreelanguage
options:
ENGLISH
FRANÇAIS
ESPAÑOL
5.SYSTEM INFO
Displaysomeinformationaboutthedisplay,mayalso
be displayed by pressing the hotkey INFO on the
remote control.
♦MODELNUMBER
Showthedisplay’smodelnumber
♦MAININPUT
Displaytheinputsignalofcurrentmainpicture
♦WIDEFORMAT(MAIN)
Displaymainpicture’saspectratio(Refertopage25)
♦PIPINPUT
Displaytheinputsignalofcurrentmainpicture
♦LAMPTIME
Displaythetimethelamphasconsumed.
♦SOFTWAREVERSION
Displaythedisplay’ssoftwareversion
6.RESET ALL SETTING
SelectYEStoreturnallOSDsettingstothedefult
values,theLAMPtimerandOSDdisplaylanguagewill
not be affected. Select NO to stay unchanged.
7.RESET LAMP TIMER
SelectYEStosetthetimelampconsumedtozero.
Select NO to stay unchanged.
When installing a new lamp, be sure to set
the LAMP TIMER to zero. This ensures correct
display of the time consumed by the lamp.
8.SLEEP TIMER =remote control key "SLEEP"
Set up the time to turn off the display, works the same
as the hotkey SLEEP on the remote control. The sleep
timer will be reset to zero every time when the display
restarts. If it is set to 30 minutes, this means in 30
minutes from the timer is set, the display will be turned
off automatically. If the timer is set to OFF, the function
will be disabled.
8
How to use OSD
 previous next