Vivitek dx6851 Projection Television User Manual


  Open as PDF
of 54
 
18
DU6871/DW6851/DX6831 DLP Projector - User's Manual
Connecting to the control equipment
The projector has the following control port for connecting to the control equipment:
3D sync signal
transmitter (IR)
• HDBaseT/LAN (Network control): The projector supports network control� LAN and
HDBaseT share the port� If only network control is used, you can connect the LAN on the
projector to PC or through the local network� Refer to the remote control guidelines for
detailed information�
• RS-232 (RS-232c control): The projector supports RS-232c serial control� The
projector can be remote-controlled by connecting the projector to PC or control system
through the standard 9-pin serial cable (Straight Through Serial Cable)� Refer to the
remote control guidelines for detailed information�
• Wired remote control: If the projector cannot receive the IR signal from the remote
control due to the overly long distance or obstacles, you can connect the cable to the
IR remote control or the external IR transmitter (optional) via the WIRE input port to
expand the working range of the remote control�
• 3D Sync Out: 3D IR sync signal transmitter�
Note:
• Whentheterminaloftheremotecontrolcableisinsertedtothewiredcontrolterminaloftheprojector,the
projectorwillautomaticallyswitchtothewiredcontrolmodeandcannotbecontrolledthroughtheIRsignal
oftheremotecontrol.Disconnectthewiredcontrolterminalontheprojectorifyouwanttocontrolthrough
theIRsignaloftheremotecontrol.
• IfthewiredremotecontrolcableortheexternalIRtransmitterisinsertedtotheincorrectport,suchas
Trigger,theremotecontrolortheIRtransmittermaybedamaged.Makesurewhethertheportiscorrect
beforeinsertion.
 previous next