Vivitek dx6851 Projection Television User Manual


  Open as PDF
of 54
 
20
DU6871/DW6851/DX6831 DLP Projector - User's Manual
Connecting to the External HDBaseT Transmitter
The projector has a built-in HDBaseT signal receiver� With the HDBaseT Transmitter
(optional), the video, RS-232 and LAN signals can be sent to the projector via a single
RJ-45 cable� If the HDBaseT Transmitter you purchased supports the input and output of
the IR remote control, the control signals from the IR remote control can be sent to the
DU6871/DW6851/DX6831 projector via the RJ-45 cable�
VGA IN
RJ45
Lan
HDMI RS232 RJ45
HDBaseT
YPbPr
VGA Cable
DVD Player DVD Player
Hub
RS-232c
RJ-45 Cat5e or above
Control PC
Control PC
HDBaseT transmitter
Projector
Note:
• Theprojectorsupportsthevideosignal,R-232,IRremotecontrolandthereceptionofthenetworkcontrol
signalsbutdonotsupportPoweroverEthernet(PoE).
• SettheControl->RS232->ChannelontheOSDmenutoHDBaseTifyouwanttousetheexternal
HDBaseTtransmittertosendtheRS232commandtotheprojectorviatheRJ45cableandbaudratewill
switchto9600.
• IfthecommandissentviatheHDBaseTtransmitter,thelongesttransmissiondistanceis100meters.The
projectionmaybeinterruptedorinterfered,orthecontrolsignalcannotbesentifthetransmissiondistance
isexceeded.
• UsetheRJ-45Cat5eorabovecableandavoidentwining.Entwiningmaycausedamage,interferesignal
transmission,reducethetransmissiondistanceanddegradetheimagequality.
 previous next