Filter
Top Products
39
12.3. Basic Setting Operations
Here, basic operating procedures for each setting item are described. Enter a password to log in to Operation
Level 1 and display the Remote Controller’s menu. Refer to p. 33; Log-in and Log-out for the log-in method.
12.3.1. Displaying the menu
Note
While the digital video recorder is displaying each menu (Search Menu, Triplex Menu, or Archive Menu) or
while the combination camera’s camera menu is being displayed by the remote controller, the remote
controller’s menu cannot be activated even if the remote controller’s menu key is pressed.
1. Hold down the Menu key for 2 seconds or more. If no
password has been set, the Remote Controller’s
menu screen is displayed.
2. Select “RM MENU” using the joystick.
3. Rotate the joystick clockwise or press the SET key to
confirm the selection.
The menu screen is displayed.
GROUP
SET
MENU
SHIFT
PASSWORD
LOGOUT
PASSWORD
RM MENU
12.3.2. Operation during menu display
1. Select the setting item using the joystick.
2. Confirm the selected setting item by rotating the
joystick clockwise or using the SET key. Rotate the
joystick counterclockwise or press the C key to
cancel the selection.
3. Select the setting contents using the joystick.
4. Press the SET key to confirm the selected setting
contents.
5. To continue settings of other items, repeat Steps 2-5.
Hold down the Menu key again for 2 seconds or
more to return to the normal screen after setting
completion.
Note
Numerals can be entered using the joystick or
numerical keypad. The joystick cannot be used to enter
numbers on the password-setting screen.
12.3.3. Closing the menu
Hold down the Menu key for 2 seconds or more while the menu is displayed. The display reverts to the screen
shown before the menu was displayed.
BUZZER
1.ON
1
SET
BUZZER
1.ON
(Example)
BUZZER
2.OFF
2
BUZZER
2.OFF
SET