Filter
Top Products
43
12.4.4. Abbreviation (Function programming)
The functions of the Combination Camera and Digital Video Recorder can be programmed into an
abbreviation number (1
-
508 and F1
-
F4 keys).
Note
The Combination Camera's protocol must be selected before performing abbreviation number settings. If the
protocol is selected, this permits the available functions to be selected for the camera.
1. Select [ABBREVIATION] while the menu is
displayed and press the SET key.
2. Select [1. SET] and press the SET key.
3. Enter an abbreviation number and press the SET
key.
Use numbers 1
-
508. The F1
-
F4 keys can be
selected with the joystick. Pressing the SET key
moves the flashing cursor to the second line.
4. Tilt the joystick to the left or right to select the
function to be programmed and press the SET
key.
Functions that can be set are as shown in the
table below.
5. To continue to set abbreviation numbers, repeat
Steps 3 and 4. To return to the setting item
display, press the C key.
SET 1
AUTO FOCUS
1
Function name
Abbreviation Nos.
1
-
508 and F1
-
F4
Function programming screen
When the camera's protocol is TOA-A (Type A)...
D M C P
DVR NAME DISPLAY
DVR NAME HIDE
ZOOM ON
ZOOM OFF
AUTO FOCUS
AUX1 ON
AUX1 OFF
AUX2 ON
AUX2 OFF
AUTO PAN
PRESET SEQUENCE
AUTO TRACE
FUNCTION A
-
Z
Function Name Function Name
Description Description
Quick display setting screen
DVR Name display
DVR Name hide
Zoom ON
Zoom OFF
Auto focus
Contact 1 ON
Contact 1 OFF
Contact 2 ON
Contact 2 OFF
Auto pan start
Preset sequence start
Trace start
Cannot be used