Filter
Top Products
16
4
VBR133
Changing the Blu-ray 3D Mode
Your player’s default 3D setting is Automatic, meaning that the player will detect
3D Blu-ray content and automatically prompt you when that content is available.
If you would like to deactivate this automatic detection and always view Blu-ray
3D content in 2D, change the Blu-ray 3D mode.
To change the Blu-ray 3D mode:
1. From the Display menu, use the Up/
Down Arrow buttons on the remote to
highlight Blu-ray 3D Mode and press
OK.
The Blu-ray 3D Mode menu is
displayed.
2. Highlight Automatic or Forced 2D and
press OK.
Adjusting the Audio Settings
The settings in the Audio Menu configure the player’s digital audio outputs (HDMI,
Coaxial, or Optical/SPDIF).
The Audio Menu settings will not affect any audio output from the
analog L and R (left and right) ports. The audio settings are for digital
output only.
To access the Audio Menu:
1. Turn on the player and your TV. Use
the Arrow buttons on the remote to
highlight Settings and press OK.
The Settings menu is displayed.
2. Use the Arrow buttons on the remote
to highlight Audio and press OK.
The Audio drop-down menu is
displayed. Your current settings are
displayed to the right of each menu
option.