Vizio VBR133 Blu-ray Player User Manual


  Open as PDF
of 50
 
4
17
VBR133
Changing the PCM Downsampling Rate
This setting should be adjusted if your home audio receiver can process
high-bitrate PCM signals over the Optical/SPDIF or Coaxial port.
If you are unsure about how to adjust this setting, leave the PCM
Downsampling rate at 48 kHz.
Changing this setting has no effect if your audio is connected via
HDMI cable.
If you have the player connected to a home audio receiver and your receiver can
process high-bitrate PCM signals:
1. From the Audio menu, use the Up/
Down Arrow buttons on the remote
to highlight PCM Downsampling and
press OK.
The PCM Downsampling menu is
displayed.
2. Highlight the highest downsampling
rate your reciever can process and
press OK. (Devices differ; see your
receiver’s user manual for details.)
Adjusting the Digital Audio Output
This setting changes the type of digital audio data the player outputs over HDMI,
Optical/SPDIF, or Coaxial ports. Depending on your setup, you may need to try
several settings.
1. From the Audio menu, use the Up/
Down Arrow buttons on the remote to
highlight Digital Output and press OK.
The Digital Output menu is displayed.
2. Highlight the digital audio format best
suited to your home audio receiver and
press OK:
• PCM-Usethissettingifyoudonothaveareceiverconnectedtothe
player,orifyouhavean“old-fashioned”stereoreceiverconnectedto
theplayerusingthestereoanalog(LandR)ports.
• Bitstream HD-UsethissettingifyouhaveanHDMI-connected
recievercapableofdecodingDTS-HDMasterAudioandDolbyTrueHD
digitalaudio.Whenusingthissetting,youcanonlylistentotheprimary
audiotrackonadisc(thisisusuallythemovie’ssoundtrack).
• Bitstream Legacy -If you are unsure about which setting to use,
select this setting.UsethissettingifyouhaveanOptical/SPDIF-
connectedreceivercapableofdecodingDTS,DolbyDigital,orDolby
DigitalPlusaudio.
• Bitstream Mixed-UsethissettingifyouhaveanOptical/SPDIF-or
HDMI-connectedreceivercapableofdecodingDTS,DolbyDigital,
orDolbyDigitalPlusaudioandyouwouldliketobeabletohear
secondaryaudiotracksonyourdiscs(directors’commentaries,etc).
• PCM 5.1-(AvailableonlywhenaudioisconnectedwithHDMI.)Use
thissettingifyouhaveahomeaudioreceivercapableofprocessing
uncompressed5.1soundfromanHDMIconnection.If you are
listening to audio over the optical/SPDIF or coaxial connection, the
PCM output is limited to 2 channels.
• PCM 7.1-(AvailableonlywhenaudioisconnectedwithHDMI.)Use
thissettingifyouhaveahomeaudioreceivercapableofprocessing
uncompressed5.1soundfromanHDMIconnection.If you are
listening to audio over the optical/SPDIF or coaxial connection, the
PCM output is limited to 2 channels.
 previous next