Filter
Top Products
VIZIO VBR100 User Manual
34
www.VIZIO.com
Video Problems Solution
Video is not in high definition.
! Connect using HDMI or Component. Composite cannot output in high definition.
! If you have connected the TV to the HDMI or component video jacks, make
sure that you have selected the correct resolution in the setup menu.
! Almost all commercial DVDs (but not Blu-ray discs) limit component video
resolution to 480p. Upscaling of commercial DVD content is only possible over
HDMI.
! Your TV is not capable of displaying HD video. Consult your TV documentation.
Video pauses momentarily.
! This occurs normally between play list chapters or scenes.
! Video momentarily pauses when your player switches between layers on a
dual-layer disc.
4:3 aspect ratio picture
expands left and right or
screen size is incorrect.
! Use the TV to change the aspect ratio. See the documentation that came with
the TV.
! If the TV is connected to the component video jacks, set TV Aspect to 4:3 Pan
& Scan.
! If the TV is connected to HDMI, set the TV Aspect to 16:9.
No sound.
! Press Volume + (Up) on the TV remote control.
! Press MUTE on the TV remote control to make sure that MUTE is not ON.
! Make sure that headphones are not connected to the TV or home theater
system.
! Check the audio connections of external devices that may be connected.
The screen is black.
! Make sure the power is ON.
! Press the input or source button on the TV remote control to select the input
source for the player.
! Check the connections of external devices that may be connected.
! Make sure that the disc is not dirty or defective.
! Press STANDBY/ON, wait five seconds, then press STANDBY/ON again to
reset the player.
PIP does not work with a
Blu-ray Disc.
! Make sure that the Blu-ray disc allows PIP. See the documentation that came
with the disc.
Cannot change the viewing
angle.
! Not all discs or scenes are recorded with multiple viewing angles.
Power is ON but there is no
image on the screen.
! Check the connections of external devices that may be connected.
! Adjust brightness, contrast, or backlight on the TV.
! Press the input or source button on the TV remote control to select the input
source for the player.
You see a distorted picture.
! Press STANDBY/ON, wait five seconds, then press STANDBY/ON again.
! Check the video cables to make sure they are securely connected.