Filter
Top Products
6
Key Charts
Key Function
Use SETUP for all programming
sequences. Also use to turn backlighting
ON/OFF, if applicable.
Press POWER once to turn ON or OFF a
home entertainment device.
Press TV, DVD/VCR, SAT or AMP once to
select a home entertainment device to
control. Also see DEVICE MODE TABLE on
page 8.
Each device mode key has an embedded
LED (red light) that blinks upon selection
and indicates the remote control is
working and (after programming) is
sending signals.
Use GUIDE to display the program guide.
Use ALL to control all lighting nodes in the
network.
Use INFO to display the current channel
and program information.
Use the CURSOR keys to move the cursor
in the program guide and menu screens
and to navigate within the interactive
service.
Use OK to choose options, PPV events, and
to tune to programs from the program
guide.
Use EXIT to exit out of your cable
converters menu and guide.
Use VOL+ (or VOL -) to raise (or lower) the
audio volume.
Use BRIGHT or DIM to control the
brightness level of your lights.
Use CH+ (or CH-) to select the next higher
(or lower) channel.
For DVD players, use these keys to skip
forward (or reverse) through chapters.
For amplifiers/receivers, use these keys to
select the next higher (or lower) preset
station.
Use ON or OFF to turn your Z-Wave
®
compatible devices on or off.
Continued next page...