Filter
Top Products
30
Adjusting PC settings
Make sure the PC and display TV has been well connected; also source input has been switched to PC
(VGA) mode.
When access Settings sub-menu, press arrow keys
to select PC Settings and make adjustment.
H-Position
Move the image in horizontal way
and it may goes beyond display
active area to produce a black bar in
an opposite side.
V-Position
Move the image in vertical way and it
may goes beyond display active area
to produce a black bar in an opposite
side.
Phase
A
djusts when characters have low
contrast or when the picture flickers.
Auto Sync
System automatically adjust the best
fit parameter at horizontal, vertical,
and phase items in view of the
current VGA input signal.
DPMS
When VGA is choose input source,
press Enter button on the remote to
enable or disable the display power
management mode. While enable
DPMS, TV will run power saving
mode while no signal detected. (For
more detail, please refer page 27)
DMPS Timer
Set the DPMS timer you want. Set the time before DMPS goes into effect.
When access Settings sub-menu, press arrow keys
to and Enter button on the remote control to set the
DPMS Timer.
DPMS : Display Power Management Signaling