Filter
Top Products
Installation 7
MAN0406 (Rev. 9/7/2007)
Install Tractor Brackets
With Woods LS84 Loader Mount
1. Place left tractor bracket (2) under left side of
tractor. Use a hydraulic floor jack to help raise
and hold tractor bracket in position.
2. Attach left tractor bracket (2) to left loader mount
using two cap screws (26), hardened flat washers
(23), and hex nut (27).
3. Attach tractor bracket to the bottom of rear axle
using two cap screws (16), four hardened flat
washers (22), hex nuts (15), and modified spacer.
NOTE: Place tractor spacer between ROPS
brackets with flange on top.
4. Place right tractor bracket (1) under right side of
tractor. Use a hydraulic floor jack to help raise
and hold tractor bracket in position.
5. Attach right tractor bracket (1) to front mount (32)
using two cap screws (26), hardened flat washers
(23), and hex nut (27).
6. Attach tractor bracket to the bottom of rear axle
using two cap screws (16), four hardened flat
washers (22), hex nuts (15), and modified spacer.
Figure 8. Tractor Brackets Installed with LS84 Loader
1. 1013462 Right tractor bracket
2. 1013463 Left tractor bracket
15. 1093 1/2 NC Hex nut
16. 13563 1/2 NC x 6 Cap screw GR5
22. 57816 1/2 Hardened flat washer
23. 57817 5/8 Hardened flat washer
26. 902 5/8 NC x 2 Cap screw GR5
27. 230 5/8 NC Hex nut
32. 1026846 Right front mount