Filter
Top Products
30
SETUP & HISTORICAL DATA
The following table is a summary of the major values that may be changed through
Setup or by accumulating historical data. The column on the right is provided to write down
your setup values or historical data. Be sure and know these values before calling for
customer service. Multiply values by two for 24-volt systems.
PARAMETER DEFAULT Bat. 1 Bat.2
BATTERY VOLTS
CHARGED
13.2 V _________ ________
BATTERY AMPS
CHARGED
2% _________ ________
BATTERY CAPACITY 200 Ah _________ ________
DATA Bat. 1 Bat.2
CEF _________ ________
# OF CEF RECALC'S _________ ________
AVG DEPTH OF DISCHARGE _________ ________
DEEPEST DEPTH OF DISCHARGE _________ ________
FUNCTIONS DEFAULT Bat. 1 Bat.2
DISPLAY SCAN (F01) Off _________ ________
DISPLAY SLEEP (F02) ON _________ ________
AMBIENT TEMP. (F03) 70 °F _________ ________
Ah/kWh (F04) Ah displayed _________ ________
ALT. ENERGY (F05) Off _________ ________
Manual CEF (F06) 95% This value should
only be set if you do NOT
want your Link 20 to
automatically calculate CEF _________ ________
TEMP. COEF. (F07) 0.5 _________ ________
PEUKERT EXP. (F08) 1.25 _________ ________
DISCH. FLOOR (F09) 100% _________ ________
BATTERY TYPE (F10) #1 LIQUID LEAD ACID _________ ________
SOFTWARE REV. (F15) (Same for either battery) _________ ________