Filter
Top Products
33
Installation
Installation Steps
10/31/13 P1058563-003
Step 6: Test a Printer
Request Settings from a Printer
In this section, you will test a printer to verify that the AirWatch console is able to request the
current settings from the printer.
1. Turn on the printer.
2. Log into the AirWatch console, if necessary.
3. To see specific details about this printer, click on the Friendly Name of the printer.
The printer summary appears. If the printer settings appear on the screen, AirWatch is
receiving settings from the printer.
Note • Once you are logged in, the printer appears on your console after approximately 60
seconds. (See figure below.)