Filter
Top Products
WebLink Set/Get/Do Commands
weblink.ip.conn[1|2].test.retry_interval
80
P1058563-003 10/31/13
weblink.ip.conn[1|2].test.retry_interval
Description This command determines how often, in seconds, a connection to the
test.location URL should be attempted. This setting is only applicable when the
test.test_on
SGD is set to
"interval" or "both".
^JUF,^JUS,^JUN,^JUA, and device.restore_defaults do not have any affect on this
setting.
Supported Devices
• iMZ 220™, iMZ 320™
• QLn220™, QLn320™, QLn420™
• ZT210™, ZT220™, ZT230™
Type setevar,getvar,do
Commands Details
setvar
This command sets the interval for how often a connection to the test.location URL should
be attempted.
Format:
• !U1setvar"weblink.ip.conn1.test.retry_interval""value"
• !U1setvar"weblink.ip.conn2.test.retry_interval""value"
Value s: 0‐1800(inseconds,providing0second‐30minuteinterval)
Default: "900"
getvar
This command retrieves the retry interval.
Format:
• !U1getvar"weblink.ip.conn1.test.retry_interval"
• !U1getvar"weblink.ip.conn2.test.retry_interval"
do
This command sets the interval for how often a connection to the test.location URL should
be attempted.
Format:
• !U1do"weblink.ip.conn1.test.retry_interval""value"
• !U1do"weblink.ip.conn2.test.retry_interval""value"
Value s: 0‐1800
Default: "900"