Filter
Top Products
59
Troubleshooting
Troubleshooting
10/31/13 P1058563-003
Using AirWatch
Issue Reason Solution
I add a printer to a Location
Group. Once the printer is
powered off and on, it is no longer
associated with the original
location group.
Some settings are not stored until a
profile is published to that printer.
a. Create a generic profile for the
Location Group.
b. Set the option to Auto install
and click Publish.
(All settings are saved and sent
to all of the printers within the
group.)
I add a printer to a Location
Group. I click Soft Reset on the
AirWatch console and it is no
longer associated with the original
location group.
Some settings are not stored until a
profile is published to that printer.
a. Create a generic profile for the
Location Group.
b. Set the option to Auto install
and click Publish.
(All settings are saved and sent
to all of the printers within the
group.)