Filter
Top Products
77
WebLink Set/Get/Do Commands
weblink.ip.conn[1|2].retry_interval
10/31/13 P1058563-003
weblink.ip.conn[1|2].retry_interval
Description This command sets the number of seconds between attempts to connect to the
server URL provided in
weblink.ip.conn1.location. If an attempt is unsuccessful or the
connection is lost, the printer will wait
'retry_interval' seconds before attempting to
connect again.
^JUF,^JUS,^JUN,^JUA, and device.restore_defaults do not have any affect on this
setting.
Supported Devices
• iMZ 220™, iMZ 320™
• QLn220™, QLn320™, QLn420™
• ZT210™, ZT220™, ZT230™
Type
setvar,getvar,do
Commands Details
setvar
This command sets the number of seconds to wait before attempting to reconnect to the
server.
Format:
• !U1setvar"weblink.ip.conn1.retry_interval""value"
• !U1setvar"weblink.ip.conn2.retry_interval""value"
Value s: 1‐600
Default: "10"
getvar
This command returns the number of seconds to wait between connection attempts.
Format:
• !U1getvar"weblink.ip.conn1.retry_interval"
• !U1getvar"weblink.ip.conn2.retry_interval"
do
This command sets the number of seconds to wait before attempting to reconnect to the
server.
Format:
• !U1do"weblink.ip.conn1.retry_interval""value"
• !U1do"weblink.ip.conn2.retry_interval""value"
Value s: 1‐600
Default: "10"