Filter
Top Products
67
WebLink Set/Get/Do Commands
weblink.enable
10/31/13 P1058563-003
weblink.enable
Description This command indicates if one or more of the weblink connections are active.
If there is more than one connection under the weblink branch (for example,
weblink.ip.conn1) and if any of the .location values are set, then this SGD will be set to
"on". If all connections are disabled (all connection .location values set to ""), then this
value will be set to
"off".
^JUF,^JUS,^JUN,^JUA, and device.restore_defaults do not have any affect on this
setting.
• iMZ 220™, iMZ 320™
• QLn220™, QLn320™, QLn420™
• ZT210™, ZT220™, ZT230™
Type
getvar
Commands Details
getvar
This command indicates if one or more of the weblink connections are active.
Format:
!U1getvar"weblink.enable"
Result:
• "yes" if any of the .location values are set
• "off" if all connections are disabled