Filter
Top Products
71
WebLink Set/Get/Do Commands
weblink.ip.conn[1|2].authentication.remove
10/31/13 P1058563-003
weblink.ip.conn[1|2].authentication.remove
Description This command allows the user to remove a single server/username/password
triplet from the list of authentication entries.
To remove an entry only the server name is supplied. If an invalid entry is supplied no action is
taken. If the SGD is changed when the connection is enabled
(
weblink.ip.conn[1|2].enable), it will not take effect until the connection is disabled and
then re-enabled. It is therefore recommended that this setting only be changed when
weblink.ip.conn[1|2].enable is set to "off".
^JUF,^JUS,^JUN,^JUA, and device.restore_defaults do not have any affect on this
setting.
Supported Devices
• iMZ 220™, iMZ 320™
• QLn220™, QLn320™, QLn420™
• ZT210™, ZT220™, ZT230™
Type
setvar
Commands Details
setvar
This command removes a single server/username/password triplet from the list of
authenticaiton entries.
Format:
• !U1setvar"weblink.ip.conn1.authentication.remove""servername"
• !U1setvar"weblink.ip.conn2.authentication.remove""servername"
Value s: servernamehasamaximumlengthofstringis2048characters.
Default: NA
Example • In this example, a username and a password is supplied
!U1setvar"weblink.ip.conn1.authentication.remove""my.server.lan"