Filter
Top Products
8. CUSTOMIZATION
62
206-3675
8-6. Initializing the System
About Initial Setup
Your Zenith HD Satellite Receiver is capable of receiving three types of signals; over-the-air or terres-
trial and DIRECTV programming (if you are a DIRECTV customer). Initial Setup lets you initialize your
system to function properly with your dish antenna.
Select Dish
Lets you select the correct type among three different types available; Round Dish for Satellite
Network A only, Oval Dish for Satellite Networks A and B, or Oval Dish for Satellite Networks A, B,
and C. For advice on selecting a dish that will provide the services that you desire, contact DIRECTV
(1-800-DIRECTV) or your local Zenith/DIRECTV retail expert. If you already have a dish, refer to its
user's guide to determine its type.
To receive HD programming, you should select the Oval dish type(Oval dish(Sat A,B) or Oval dish(Sat
A, B, C)) in the Select Dish menu.
Auto Detection is used to enable access to additional DIRECTV satellites after the dish is pointed.
You must select No Dish if you have no dish, and you cannot proceed further in this menu.
To select dish:
1.
Press the
Menu
button on the Remote Control to display the on-screen menu.
2.
Select the
DIRECTV
menu by pressing “ ” on the thumbstick on the remote control .
3.
Scroll down to Initial Setup by using “
DE
” on the thumbstick.
4.
Move the highlight to the right with “
G
” on the thumbstick to choose
Select Dish
.
5.
Press “ ” and the pop-up dialogue box will be displayed. Select your dish type.
6.
Select your dish type by using “
DE
” and press “ ”.
The highlight will return to the previous screen.
7.
Select
Your Location
by using “
DE
” for the next step of the initial setup.
NOTE
Although the initial setup is a
sequential process from Select Dish
to Channel Setup, each menu can
be accessed independently.