ESP 19
B06-00-0461
B06-00-0383
B06-00-0289
B06-00-0382
B06-00-0453
B06-00-0009
B06-00-0173
B06-00-0146
B06-00-0138
B06-00-0359
B06-00-0349
B06-00-0454
B06-00-0034
B06-00-0225
STAY CLEAR
WHILE RAISING
OR LOWERING
B06-00-0225
CCFO
This machine is designed and manufactured in
compliance with theANSI A92.6 standard in force on
the date of manufacture. Dealers, owners, users,
operators, lessors, and lessees are responsible for
inspection, maintenance, training, and operation as
required byA92.6 and the owners manual.
Alterations, modifications, or changes to this
machine without the written authorization of bil-jax,
inc. as well as any unauthorized adjustment of valves,
disabling or by-passing of safety devices or the
improper use of this machine shall exempt bil-jax, inc.
from any liability for any resulting injuries or damage.
B06-00-0382UOT
IFYOU HAVENOT BEENPROVIDED WITHSAFETY
LITERATURE,ORFORANYQUESTIONSCONCERNING
THESAFEUSEOFTHISEQUIPMENT,CALL419/445-9675.
Inspect unitfordamagedor worn
if liftisnotworking properly.
DO NOTusewhen exposedto
wind, rain,snoworice.
DO NOTuse whereliftcancome
intocontactwithoverheadob-
structions such as electrical
wires, cables,ropes orover-
DO NOTdrive nearloadingdocks,
ditches,holes,unguardedopen-
ings, openelevated shaftsor
parts. DONOTuse untilsuch
partsarereplaced.DONOTuse
B06-00-0383UOT
FAILURE TO COMPLY WITH THE FOLLOWING SAFETYINSTRUCTIONS OR ANY OTHER IMPROPER
USE OF THIS EQUIPMENT WILL RESULT IN SERIOUS INJURY OR DEATH.
It istheoperator'sresponsibility tocomplywith allwarningsandinstructions.
drugs oralcohol,orif youfelldizzy, illorunsteadyinanyway.
ALWAYS survey thejobsiteand identifyallpotential hazards.
affect theoriginaldesign ofthelift.
Check allsafetydevicesfor
proper functionpriortoeach use.
DO NOTusewithout entrygatein
the closedpositionunlessoperator iswearinga fullbodyharnessandlanyardandwith
the lanyardattachedtofactory providedattachmentpoint.
DO NOTraiseplatform whileonuneven,soft,orslopedsurfaces.
DO NOTDRIVElift ontouneven,
soft, orslopedsurfaceswhile
elevated.
·
·
·
·
·
·
Work onlywithin theplatform guardrail areaand donot attemptto increaseworking
height withboxes, ladders,scaffolding orany othermeans.
drop-offs.
or overhangs,etc..
DO NOTexert horizontalforce toplatform whileperforming work.
DO NOTmove liftif youdo nothave aclear viewof thepathof travel.
DO NOTexceed manufacturer'srecommended loadcapacity.
·
·
·
·
·
·
DO NOTstand orsit onguard rails..
DO NOTlean outover guardrails toperform work.
DO NOTraise orlower liftuntil youare certainall personnelare clear.
DO NOTuse nearcranes orother movingvehicles.
DO NOTleave keysin machinewhile unattended.
DO NOTallow flames,sparks orembers nearbatteries anddo notsmoke near
batteries. Batteries producehighly flammablegaseswhich canexplode.
OWNERS&OPERATORS ARERESPONSIBLEFORINSPECTION,MAINTENANCE,
TRAINING, ANDOPERATION ASREQUIREDBYTHEOWNERSMANUALANDTHE
ANSI A92.6STANDARD(INEFFECTATDATE OFMANUFACTURE).
24V DC
Patents Pending
19’6
ESP-
E.S.P. 19
B06-00-0037
B06-00-0390
COFC B06-00-0192
B06-00-0192
OPERATION AND SERVICE
MANUAL INSIDE
AERIAL WORKPLATFORMS
This equipmenttobe usedby competent,fullytrained, andauthorized personnelonly.
Operator mustreadand understandowner's manualandall decalsbefore operating.
DO NOT override or alter any safety devicesor make any modifications that would
NEVER TAKE CHANCES -DO NOToperate thislift ifyou areunderthe influenceof
·
·
·
·
·
·
·
·
·
·
·
DURINGUSE:
BEFOREUSE:
DONOTclimbupordownmasts.
Transaxle
FreeWheel
Normal Drive
El ectr ic
St ock
Pi cker
800-225-3765
CTG
CTG
B06-00-0461
OPERATION INSTRUCTIONS FOR ESP 19
1. Read andfollowsafety precautionsand all responsibilities sectionssetforth inthe operators manual
2. Make surethelift ison a firm andlevelsurface andthat there are nopotential hazards such asoverhead
obstructionsor electricallycharged conductors, usethe lift where suchhazardsexist.
3. Check theliftfor damagedor worn parts andrepairor replaceas necessary.
4. Check tobesure thatthe cage is properlyattachedto thelift.
5. Turnmaster power switch toon.
6. Check tobesure allsafety devices are functioningproperly.
7. To operatelift fromthe groundturn and hold lowercontrolswitch to"lower control" setting thenselect
eitherup ordown function.
8. To operatelift fromthe platform,turn lower control switchto"upper control"setting.
9. Make surebatterycharger cordis disconnected from outlet,placedback intoits box and lidis closed and
latched. LIFT WILL NOTOPERATEIF LID IS NOT CLOSED SECURELY.
10. Enter platformandbe certainthat the entry gateisclosed completely. LIFT WILL NOT OPERATE IF
ENTRYGATE IS NOT CLOSED COMPLETELY.
:
Depressand oneof the "enable" buttons(one“enable” buttonis on the frontofthe joystickhandle,
theother islocated to the leftof thejoystick).
Presseither theraise or lower button.
:
Depressand oneof the "enable" buttons(one“enable” buttonis on the frontofthe joystickhandle,
theother islocated to the leftof thejoystick).
Pushjoystick inthe direction (forward orbackward) that you wishtotravel.
Pressthesteeringthumbswitchonthetopofthejoystickinthedirectionyouwishthelifttoturn(either
rightor left).
Thejoystick andsteering thumb switch maybe operated simultaneously forsmoothmaneuvering.
attemptto operatethe drive function andthe raise/lower function atthesame time.
Thislift isequipped with a levelsensor that will preventthelift fromraising or driving withplatformelevated
whileon anunlevel surface. If thelift fails to raiseordrive whileelevated, lower platform immediately.
DONOT
DONOT
TORAISE ORLOWER
hold
TODRIVE
hold
·
·
·
·
·
·
·
Figure 5-1. Replacement Decals
5-2
