1-1
1
Safety
1-1
ip-
d
mon sense in the operation of mechanical equipment is the best practice
th
e implemented at all
considered as legal advice and is intended
to
For any questions concerning the safe use of this equipment, call 800-537-0540 before
operating.
INTRODUCTION
Familiarity and proper training are required for the safe operation of mechanical equ
ment. Equipment operated improperly or by untrained personnel can be dangerous. Rea
the operating instructions in this manual and become familiar with the location and
proper use of all controls. Inexperienced operators should receive instruction from per-
sons who are familiar with the equipment before operating the machine. The use of intel-
ligence and com
in any safety policy. Be professional and always observe the safety procedures set for
in this manual.
All OSHA, ANSI, state and local codes and regulations pertaining to this equipment
should be obtained, read, and thoroughly understood before attempting to operate this
equipment. Persons under the influence of drugs, alcohol, or prescription medication
should not be on or near this equipment. Common sense should b
times during the use of this equipment. Do not operate this equipment in areas where
equipment or user may come in contact with live power source.
The information contained herein is not to be
for informational purposes only. This information is offered to alert Bil-Jax customers
procedures that may be of concern to them.
This information is not intended to be all-inclusive and is to be followed in the use of
Bil-Jax equipment only.
