Managing Interface Properties
152 PATROL DashBoard User Guide
5 In Notifications, specify the type, if any, of notifications that you want:
■ E-mail: Select the check box to send threshold-crossing e-mail notifications for
each indicator.
■ SNMP: Select the check box to send threshold-crossing SNMP traps to the SNMP
managers.
6 In Other Properties, select Enable Polling to collect the object counters.
7 Click Apply Changes.
Managing E1 Channel Properties
You can set or modify the properties of an individual E1 channel, as well as being
able to set properties globally.
To Modify Individual E1 Channel Properties
1 In the Network portion of the navigation tree, right-click the E1 channel and choose
Properties.
The E1 Channel Properties screen is displayed, as shown in Figure 76:
Figure 76 E1 Channel Properties Screen
2 In Label, specify a new label to be displayed in the navigation tree.
3 In Bandwidth, enter the E1 channel bandwidth. This value is usually obtained
during the discovery procedure; however, it can be either unavailable or inexact in
the device MIB. If you need it, enter the correct value to ensure that the input and
output indicators of this E1 channel use the most appropriate scales.
